2024-2026 For BMW 5 Series G60 Blade Style Roof Spoiler

Blade Style Roof Spoiler for BMW 5 Series G60, 2024-2026

The G60 finishes the top of the rear windscreen with a plain body-colour edge. This blade style roof spoiler caps that edge and continues the roofline rearward, which visually stretches the roof and breaks up the large painted surface above the rear glass.

The blade is moulded to the G60 roof curvature, so it sits tight along the full width instead of lifting at the ends. It fits with pre-applied automotive tape only — no drilling, no removal of the rear glass, and no effect on the roof aerial or the high-mount brake light.

Design and Construction

• Moulded to the G60 roof radius, so the blade follows the screen edge without gaps at the corners.
• Blade profile with a raised centre peak — subtle in profile, but enough to change how the roofline reads from behind.
• Moulded ABS with either a painted gloss black or a hydro-dipped carbon fiber style finish.
• Pre-applied automotive-grade double-sided tape along the full contact face; no drilling and no glass removal.
• Sits clear of the roof aerial, the high-mount brake light and the rear washer nozzle.
• Weighs 1.1 kg, so it adds no meaningful mass at the highest point of the car.

Vehicle Compatibility

This roof spoiler was tooled for the G60 sedan. The table below shows the exact coverage; check the exclusion list before ordering.

Fitment is body-style specific. Read the exclusions below before ordering — the wrong bumper style is the most common return reason for this part.

• Does NOT fit the G61 Touring — the Touring roof runs to a different rear screen angle and uses a different spoiler.
• Does NOT fit the previous generation G30 / G31 / G38 (2017-2023) or the F10 / F11 (2010-2016).
• Does NOT fit the BMW M5 (G90), which uses a different rear screen surround.
• Does NOT fit cars already fitted with an OEM or aftermarket roof spoiler, or cars with a roof wrap that has not been removed at the contact area.

The supplier lists this part for the G60 only. The Chinese-market G68 long-wheelbase sedan shares the same rear screen and roofline, so the part is listed under the store G60/G68 chassis group. If your car is a Touring (G61), this part will not fit.

Specifications

What Is in the Box

• 1 x blade style roof spoiler in the selected finish
• 1 x roll of promoter wipes for the tape surfaces
• 1 x installation instruction sheet (English)

Installation Notes

1. Clean the rear roof edge and the top of the rear screen with isopropyl alcohol and let it fully flash off.
2. Dry fit the blade and mark the centre with a strip of masking tape on the glass.
3. Warm the tape and the roof surface with a heat gun on low if ambient temperature is below 15 degrees C.
4. Peel the backing, align to the centre mark and press from the middle outward with firm, even pressure.
5. Hold for 60 seconds per section, then check both ends are seated flush against the roof edge.
6. Do not wash the car or drive at highway speed for 24 hours.

Finish, Care and Expectations

Gloss black can be polished, sealed and waxed like body paint. Carbon fiber style is a hydro-dipped pattern under clear coat: do not sand, compound or machine polish it, because the pattern sits directly under the clear layer and will be cut through. Wash with a pH-neutral shampoo and a soft mitt.

Because the part is held by tape rather than fasteners, surface preparation matters more than on a bolt-on lip. If the roof edge has been waxed recently, strip it with isopropyl alcohol and re-fit; a tape bond over wax will release in hot weather. In extreme heat, park with the rear of the car facing away from direct afternoon sun where possible.

Shipping and Handling

Packed in a double-wall carton with foam corner blocks; the blade is long and slim, so the carton is rigidised along its length to prevent bowing in transit. Ships from our US warehouse within one business day; transit is typically 2-5 business days for the continental United States.

Why Buy From EliteGermanParts

Every part in this catalog is selected for one generation of BMW only. We publish the chassis code, the exact model years and the body-style exclusions on the product page instead of a vague "fits most 5 Series" claim, because a 2024 G60 bumper is not the same shape as a 2019 G30 bumper. If you are unsure which version your car takes, send us the last seven characters of your VIN and a photo of the bumper you are fitting and we will confirm the correct part before you order.

Parts are stored and shipped from our own warehouse, inspected for warping and cracked gel coat before packing, and protected with foam corner blocks and a double-wall carton. Orders placed before 2:00 PM Eastern on a business day leave the same day. If a part arrives damaged, send photographs of the carton and the part within 48 hours and we will replace it.